Features:
- Line-interactive UPS Topology
- Generator Compatible
- Overload Protection
- EMI and RFI Filtration
- LED Status Indicator
- Configurable Alarm
- Tower Form Factor
- Automatic Voltage Regulation (AVR)
- Simulated Sine Wave Output
- Surge and Spike Protection
- Phone/Fax/Modem/DSL/Network Protection
- USB Connectivity Port
- PowerPanel Management Software
CyberPower UT1500E provides home and office users with a reliable battery backup and safeguards office PCs, network communication equipment, and other electronic devices from surges, spikes, brownouts and other power incidents.
The product is generator-compatible, which allows users flexible application scenario planning for power outages. The built-in Automatic Voltage Regulation (AVR) stabilizes the AC signal to deliver power at safe voltage levels for all connected equipment without resorting to battery power.
Here is the same specification rewritten in a crisp, clean, non-table format, suitable for an e-commerce “Specifications” section.
All technical details are preserved, but wording is concise and readable.
Product Specifications
This UPS operates on a single-phase power supply and features a tower form factor with a line-interactive topology, making it suitable for home and office environments. It is generator compatible and supports a nominal input voltage of 230V (±10%), with an input voltage range of 165V to 290V. The UPS automatically senses input frequencies of 50Hz or 60Hz (±10%) and draws a rated input current of 6.82A. It uses an IN/ZA input connector and includes a 1.2-meter (4-foot) power cord.
Output Performance
The unit delivers a total capacity of 1500 VA / 900 watts. During battery operation, it provides a simulated sine wave output with an output voltage of 230V (±10%) and output frequency of 50Hz or 60Hz (±1%). It is equipped with automatic voltage regulation (AVR) featuring single boost and single buck functionality. Overload protection is provided via a circuit breaker. The UPS includes four IN/ZA outlets, all of which offer battery backup and surge protection.
Battery Details
The UPS uses a sealed lead-acid battery system. It delivers an approximate runtime of 90 minutes at 60W load and 60 minutes at 90W load. Typical battery recharge time is 8 hours. The unit supports cold start (start on battery) functionality. Batteries are not user-replaceable and require two replacement battery packs (RBP0089) when servicing is needed.
Surge Protection and Filtering
Surge protection is rated at 125 joules. The UPS includes EMI/RFI noise filtration and provides RJ11/RJ45 phone and network protection with one input and one output port.
Management and Communication
The UPS features LED indicators for power status, line mode, battery mode, battery capacity, and low battery alerts. It includes one HID-compliant USB port and supports audible alarms for battery mode, low battery, overload, and system faults. A USB management cable is included, and the unit is compatible with PowerPanel Personal power management software.
Physical Characteristics
The UPS is housed in a durable plastic enclosure with a black finish. The physical dimensions of the unit are 148 × 178 × 298 mm (5.83 × 7.01 × 11.73 inches) and it weighs 9.1 kg (20.06 lbs).
Shipping Details
Shipping dimensions are 271 × 202 × 397 mm (10.67 × 7.95 × 15.63 inches) with a total shipping weight of 9.7 kg (21.38 lbs).
Environmental Specifications
The UPS is designed to operate in temperatures ranging from 0°C to 40°C, with relative humidity between 0% and 90% (non-condensing). It supports operating elevations up to 3000 meters (9,843 feet). Storage conditions include temperatures from -20°C to 50°C, humidity up to 90%, and storage elevation up to 3000 meters. Thermal dissipation during online operation is 102 BTU/hr, and audible noise at 1.5 meters is 50 dBA.
Certifications and Warranty
The product is BIS certified and RoHS compliant. It comes with a 2-year product warranty and a 1-year battery warranty.
Note: Features, pricing, and specifications are subject to change without prior notice.
