• Brand:ARCTIC
• Product Code:ACFAN00312A 

  Features:

  P12 Pro PST CO

  120 mm PWM Fan with Cable Splitter for Continuous Operation

  Maximum Performance, Redefined

  Revised fan blade design for an optimal balance of performance and smooth operation.

  Optimized Bearing-Shaft Design (DBB)

  A dual ball bearing with an extended rotor shaft ensures high durability and maximum lifespan at high rotational speeds.

  SOTA Microcontroller

  Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.

  Minimum Gap Dimensions for Maximum Efficiency

  Enables higher static pressure and maximum airflow efficiency.

  More Power – Less Noise

  The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) – ideal for quiet, powerful cooling.

  6-Year Warranty – Because Satisfaction Matters 

  Size	120 mm
  Pack	Single
  Warranty	6 Years

• Brand:ARCTIC
• Product Code:ACFAN00137A 

  Features:

  Optimised for Static Pressure
  During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.

  0 dB Mode — Zero rpm
  The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

  Strong Cooling Performance
  Numerous improvements, such as updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. In internal performance tests leveled to 28 dB(A), the new P-fans left many competitors behind.

  More Efficient Technology
  The motor is powered by a PWM IC of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors. This saves energy without compromising the performance.

  Maximum Quietness, Minimum Vibration
  Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

  Extended Life Span
  A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.

  200 to 1800 rpm Regulated via PWM PST
  Thanks to the 4-Pin Connector, the rpm can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

  High-Quality Bearing
  Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

  Two Way Installation

  • Push warm air out of the case
  • Pull cool air into your case

  Specifications:

  Model Name	P12 PWM PST 5 Pieces (ACFAN00137A)
  Performance
  Fan Speed	200—1800 rpm PWM Controlled (0 rpm below 5 % PWM)
  Airflow	56.30 cfm | 95.70 m³/h
  Static Pressure	2.20 mmH2O
  Noise Level	0.3 Sone
  Operating Ambient Temperature	0—40 °C
  Fan
  Fan Frame	Standard
  Control Type	PWM PST
  Connector	4-Pin Connector + 4-Pin Socket
  Fan Bearing	Fluid Dynamic Bearing
  Electric Characteristics
  Typical Voltage	12 V DC
  Starting Voltage	3.9 V
  Current | Voltage	0.1 A | 12 V DC
  Cable Length	400 mm
  Size & Weight
  Length	120 mm
  Width	120 mm
  Height	25 mm
  Weight	145 g
  Warranty	6 Years
  Note	Features, Price, Specifications are subject to change without notice. Images used for Representation purpose only  LED No Size 120 mm Pack Five Warranty 6 Years

Features of ARCTIC P12 Slim 120mm PST PWM

1. Ideal where space is limited
2. OPTIMISED FOR STATIC PRESSURE
3. MORE EFFICIENT TECHNOLOGY
4. MAXIMUM QUIETNESS, MINIMUM VIBRATION
5. EXTENDED LIFE SPAN
6. 300 TO 2100 RPM REGULATED VIA PWM PST
7. HIGH QUALITY BEARING
8. TWO WAY INSTALLATION

Ideal for Small Spaces

Unlike standard 120 mm case fans with a thickness of 25 mm, the ANTEC P12 Slim PWM PST has a mounting depth of only 15 mm. This makes it the ideal choice for Small Form Factor (SFF) builds. Corresponding screws for mounting on a radiator are already included.

Optimised for High Static Pressure

Because the fan design of the P12 Slim PWM PST is optimised for focused airflow, it generates high static pressure. The fan enables extremely efficient cooling and good airflow — even with increased air resistance. This makes the P12 Slim PWM PST particularly well-suited for use on concealed case intakes, dust filters, radiators, and generally in small cases that have little space for free airflow due to compactly placed hardware.

Maximum Quietness, Minimum Vibration

The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling.

Improved Service Life

The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. As a result, coil temperature is reduced by up to 20 degrees, quadrupling service life, while reduced frictional losses ensure more efficient operation.

300 to 2100 rpm Controlled via PWM PST

With a wide speed range and innovative PWM Sharing Technology (PST), the P12 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series.

High-Quality Sleeve Bearing

Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly.

0dB Mode — Zero rpm

The speed of the P12 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while guaranteeing maximum performance on demand.

Versatile Use

The P12 Slim PWM PST allows customisable installation in the case. It can both suck in cool air as an Intake fan and push out warm air as an Exhaust fan. The fan also offers both push and pull installation options on the radiator.

Specifications of ARCTIC P12 Slim 120mm PST PWM

• Brand:ARCTIC
• Product Code:ACFAN00275A 

  Features:

  P12 Slim PWM PST

  120 mm Low-Profile PWM Fan with Cable Splitter | 3 Pieces

  Ideal for Small Spaces

  Unlike standard 120 mm case fans with a thickness of 25 mm, the P12 Slim PWM PST has a mounting depth of only 15 mm. This makes it the ideal choice for Small Form Factor (SFF) builds. Corresponding screws for mounting on a radiator are already included.

  Optimised for High Static Pressure

  Because the fan design of the P12 Slim PWM PST is optimised for focused airflow, it generates high static pressure. The fan enables extremely efficient cooling and good airflow — even with increased air resistance. This makes the P12 Slim PWM PST particularly well-suited for use on concealed case intakes, dust filters, radiators, and generally in small cases that have little space for free airflow due to compactly placed hardware.

  Maximum Quietness, Minimum Vibration

  The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling.

  Improved Service Life

  The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. As a result, coil temperature is reduced by up to 20 degrees, quadrupling service life, while reduced frictional losses ensure more efficient operation.

  200 to 2100 rpm Controlled via PWM PST

  With a wide speed range and innovative PWM Sharing Technology (PST), the P12 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series.

  High-Quality Sleeve Bearing

  Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly.

  0dB Mode — Zero rpm

  The speed of the P12 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while guaranteeing maximum performance on demand.

  Versatile Use

  The P12 Slim PWM PST allows customisable installation in the case. It can both suck in cool air as an Intake fan and push out warm air as an Exhaust fan. The fan also offers both push and pull installation options on the radiator. 

  Cabinet Fan
  Size	120 mm
  Pack	Triple
  Warranty	6 Years
  Note***	Features, Price, Specifications are subject to change without notice.Images use for Representation Purpose Only

• Brand:ARCTIC
• Product Code:ACFAN00314A 

  Features:

  P14 Pro PST

  140 mm PWM Fan with Cable Splitter

  Efficient Performance at High Air Resistance

  Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.

  Maximum Performance, Redefined

  Revised fan blade design for an optimal balance of performance and smooth operation.

  Optimized Bearing-Shaft Design (FDB)

  A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.

  Automated Two-Plane Balancing

  An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.

  SOTA Microcontroller

  Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.

  More Power – Less Noise

  The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) – ideal for quiet, powerful cooling.

  Minimum Gap Dimensions for Maximum Efficiency

  Enables higher static pressure and maximum airflow efficiency.

  PST – PWM-Based Synchronized Fan Control

  An additional PWM connector allows multiple fans to be synchronized in series using a single header.

  6-Year Warranty – Because Satisfaction Matters

  Our products are tested under extreme conditions. The 6-year warranty isn’t just a promise – it’s a testament to our confidence in their durability. 

  Cabinet Fan
  Size	140 mm
  Pack	Single
  Warranty	6 Years
  Note***	Features, Price, Specifications are subject to change without notice.Images use for Representation Purpose Only

• Brand:ARCTIC
• Product Code:ACFAN00314A 

  P14 Pro PST

  140 mm PWM Fan with Cable Splitter

  Efficient Performance at High Air Resistance

  Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.

  Maximum Performance, Redefined

  Revised fan blade design for an optimal balance of performance and smooth operation.

  Optimized Bearing-Shaft Design (FDB)

  A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.

  Automated Two-Plane Balancing

  An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.

  SOTA Microcontroller

  Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.

  More Power – Less Noise

  The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) – ideal for quiet, powerful cooling.

  Minimum Gap Dimensions for Maximum Efficiency

  Enables higher static pressure and maximum airflow efficiency.

  PST – PWM-Based Synchronized Fan Control

  An additional PWM connector allows multiple fans to be synchronized in series using a single header.

  6-Year Warranty – Because Satisfaction Matters

• Brand:ARCTIC
• Product Code:ACFAN00239A 

  Features:

  Addressable RGB for Full Colour Control
  The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.

  0 dB Mode — Zero rpm
  The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

  Maximum Smoothness, Minimum Vibration
  The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P14 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.

  Optimised for High Static Pressure
  The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.

  200 to 1900 rpm Controlled via PWM PST
  With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.

  High Quality Bearing
  Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.

  Quality You Can Rely On
  To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14 PWN PST A-RGB.

  Specifications:

  Model Name	P14 PWM PST A-RGB (ACFAN00239A)
  Color	Black
  Performance
  Fan Speed	200—1900 rpm PWM Controlled (0 rpm below 5% PWM)
  Airflow	68.90 cfm | 117.06 m³/h
  Static Pressure	2 mmH2O
  Noise Level	0.3 Sone
  Fan
  Fan Frame	Standard
  Control Type	PWM PST
  Connector	4-Pin Connector + 4-Pin Socket
  Fan Bearing	Fluid Dynamic Bearing
  Operating Ambient Temperature	0—40 °C
  Electric Characteristics
  Typical Voltage	12 V DC
  Starting Voltage	5 V
  Current | Voltage	0.17 A | 12 V DC
  Cable Length	400 mm
  RGB Specifications
  LEDs	12 A-RGB LEDs
  Connector	3-Pin 5 V-DI-GND Connector
  Current / Voltage	0.4 A/5 V
  Cable	400 mm Cable with 80 mm Sharing Cable, Black
  Size & Weight
  Length	140 mm
  Width	140 mm
  Height	27 mm
  Weight	225 g
  Warranty	6 Years
  Note	***Features, Price, Specifications are subject to change without notice. ***Product images are for representation purposes only

• Brand:ARCTIC
• Product Code:ACFAN00276A 

  Features:

  Addressable RGB for Full Colour Control
  The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.

  0 dB Mode — Zero rpm
  The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

  Maximum Smoothness, Minimum Vibration
  The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P14 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.

  Optimised for High Static Pressure
  The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.

  200 to 1900 rpm Controlled via PWM PST
  With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.

  High Quality Bearing
  Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.

  Quality You Can Rely On
  To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14 PWN PST A-RGB.

  Specifications:

  Model Name	P14 PWM PST A-RGB (ACFAN00276A)
  Color	White
  Performance
  Fan Speed	200—1900 rpm PWM Controlled (0 rpm below 5% PWM)
  Airflow	68.90 cfm | 117.06 m³/h
  Static Pressure	2 mmH2O
  Noise Level	0.3 Sone
  Fan
  Fan Frame	Standard
  Control Type	PWM PST
  Connector	4-Pin Connector + 4-Pin Socket
  Fan Bearing	Fluid Dynamic Bearing
  Operating Ambient Temperature	0—40 °C
  Electric Characteristics
  Typical Voltage	12 V DC
  Starting Voltage	5 V
  Current | Voltage	0.17 A | 12 V DC
  Cable Length	400 mm
  RGB Specifications
  LEDs	12 A-RGB LEDs
  Connector	3-Pin 5 V-DI-GND Connector
  Current / Voltage	0.4 A/5 V
  Cable	400 mm Cable with 80 mm Sharing Cable
  Size & Weight
  Length	140 mm
  Width	140 mm
  Height	27 mm
  Weight	225 g
  Warranty	6 Years
  Note	*** Features, Price, Specifications are subject to change without notice. LED ARGB Size 140 mm Pack Single Warranty 6 Years Note*** *** Features, Price, Specifications are subject to change without notice.

• Brand:ARCTIC
• Product Code:ACFAN00138A 

  Features:

  Optimised for Static Pressure
  During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators.

  0 dB Mode — Zero rpm
  The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

  More Efficient Technology
  The motor is powered by a PWM IC of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy without compromising the performance.

  Maximum Quietness, Minimum Vibration
  Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

  Extended Life Span
  A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.

  200 to 1700 rpm Regulated via PWM PST
  With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

  High-Quality Bearing
  Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

  Two Way Installation

  • Push warm air out of the case
  • Pull cool air into your case

  Specifications:

  Model Name	P14 PWM PST 5 Pieces (ACFAN00138A)
  Performance
  Fan Speed	200—1700 rpm PWM Controlled (0 rpm below 5 % PWM)
  Airflow	72.80 cfm | 123.76 m³/h
  Static Pressure	2.40 mmH2O
  Noise Level	0.3 Sone
  Operating Ambient Temperature	0—40 °C
  Fan
  Fan Frame	Standard
  Control Type	PWM PST
  Connector	4-Pin Connector + 4-Pin Socket
  Fan Bearing	Fluid Dynamic Bearing
  Electric Characteristics
  Typical Voltage	12 V DC
  Starting Voltage	3.9 V
  Current | Voltage	0.12 A | 12 V DC
  Cable Length	400 mm
  Size & Weight
  Length	140 mm
  Width	140 mm
  Height	27 mm
  Weight	194 g
  Warranty	6 Years
  Note	*** Features, Price, Specifications are subject to change without notice.  LED No Size 140 mm Pack Five Warranty 6 Years Note*** *** Features, Price, Specifications are subject to change without notice.

Features of ARCTIC Summair 2Go Powerful Handheld Fan ( Dark Blue )

• POWERFUL: The Summair 2Go generates an almost noiseless, gentle breeze at low speed and delivers a powerful, pleasant airflow at maximum power with infinitely variable adjustment.
• PRACTICAL: Thanks to its handy design and compact dimensions, the Summair 2Go is the perfect companion for on the go – always ready for use and easy to transport.
• LONG-LASTING: The rechargeable 5000 mAh battery in standardized 26650 format enables an impressive runtime of up to 77 hours and is easy to replace.
• COMFORTABLE HOLD: The ergonomic design and subtly textured surface ensure a comfortable, secure and fatigue-free grip – ideal for mobile use.
• SECURE HOLD: Equipped with a rubberized, fold-out folding base, the Summair 2Go provides a stable grip on all surfaces without leaving scratches or scuff marks.

Specifications of ARCTIC Summair 2Go Powerful Handheld Fan ( Dark Blue )

• Description

Features of ARCTIC Summair 2Go Powerful Handheld Fan ( White )

Long-Lasting

The rechargeable, replaceable 5000 mAh battery provides a runtime of up to 77 hours.

Features:

Xtender VG (Black)

Premium E-ATX PC Case with Vertical GPU Mounting

Functional I/O Panel

No frills. Only the most important and frequently used ports are included

Tempered Glass Side Panels

Large tempered glass windows provide a clear view of the hardware.

A-RGB PSU Cover

Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.

Vertical Mounting for Graphics Cards

Enables vertical GPU installation with a 160 mm PCIe Gen 4 riser cable.

Flexible Mounting for Up to Six Drives

Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.

6-Year Warranty – Because Satisfaction Matters

Our products are tested under extreme conditions. The 6-year warranty isn’t just a promise – it’s a testament to our confidence in their durability.

Fan Support: 

Top:
3x 120 mm | 3x 140 mm
Side:
3x 120 mm | 3x 140 mm (included)
Rear:
2x 120 mm (included)

Radiator Support:

Top:
240 / 280 / 360 / 420 mm
Side:
240 / 280 / 360 / 420 mm

Front I/O:

USB-C (USB 3.2 Gen2x1 - 10 Gbps)
2x USB-A (USB 3.2 Gen1x1 - 5 Gbps)
3.5 mm Jack (Line-In/Out)
Power Button

Drive Bays:

Behind the Mainboard Tray: 3× 2,5"
HDD Cage: 2x 3,5" or 2,5" + 1x 2,5" 

• Brand:ARCTIC
• Product Code:ACPCC00019A 

  Features:

  Xtender VG (Mirror Black)

  Premium E-ATX PC Case with Vertical GPU Mounting

  Functional I/O Panel

  No frills. Only the most important and frequently used ports are included

  Tempered Glass Side Panels

  Large tempered glass windows provide a clear view of the hardware.

  A-RGB PSU Cover

  Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.

  Vertical Mounting for Graphics Cards

  Enables vertical GPU installation with a 160 mm PCIe Gen 4 riser cable.

  Flexible Mounting for Up to Six Drives

  Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.

  6-Year Warranty – Because Satisfaction Matters

  Our products are tested under extreme conditions. The 6-year warranty isn’t just a promise – it’s a testament to our confidence in their durability.

  Fan Support: 

  Top:
  3x 120 mm | 3x 140 mm
  Side:
  3x 120 mm | 3x 140 mm (included)
  Rear:
  2x 120 mm (included)

  Radiator Support:

  Top:
  240 / 280 / 360 / 420 mm
  Side:
  240 / 280 / 360 / 420 mm

  Front I/O:

  USB-C (USB 3.2 Gen2x1 - 10 Gbps)
  2x USB-A (USB 3.2 Gen1x1 - 5 Gbps)
  3.5 mm Jack (Line-In/Out)
  Power Button

  Drive Bays:

  Behind the Mainboard Tray: 3× 2,5"
  HDD Cage: 2x 3,5" or 2,5" + 1x 2,5" 

  Cabinet
  Cabinet Size	MID-TOWER
  Color	Mirror Black
  Material	Tempered Glass
  Expansion Slots	7
  Motherboard Size	E-ATX
  Max CPU Cooler Height	171 mm
  Max PSU Length	318 mm
  Max Gpu Length	482 mm
  Max 3.5" HDD	2
  Max 2.5" SSD	3
  Dust Filters	Top,Right
  Pre Installed Fans	5
  Max Fan Support	8
  Radiator Support	420mm,360mm,280mm,240mm
  Front I/O Panel	USB-C,USB-A,Power Button
  Warranty	6 Years
  Note***	Features, Price and Specifications are subject to change without notice. Images use for Representation Purpose Only.

• Brand:ARCTIC
• Product Code:ACPCC00017A 

  Features:

  Xtender VG (White)

  Premium E-ATX PC Case with Vertical GPU Mounting

  Functional I/O Panel

  No frills. Only the most important and frequently used ports are included

  Tempered Glass Side Panels

  Large tempered glass windows provide a clear view of the hardware.

  A-RGB PSU Cover

  Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.

  Vertical Mounting for Graphics Cards

  Enables vertical GPU installation with a 160 mm PCIe Gen 4 riser cable.

  Flexible Mounting for Up to Six Drives

  Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.

  6-Year Warranty – Because Satisfaction Matters

  Our products are tested under extreme conditions. The 6-year warranty isn’t just a promise – it’s a testament to our confidence in their durability.

  Fan Support: 

  Top:
  3x 120 mm | 3x 140 mm
  Side:
  3x 120 mm | 3x 140 mm (included)
  Rear:
  2x 120 mm (included)

  Radiator Support:

  Top:
  240 / 280 / 360 / 420 mm
  Side:
  240 / 280 / 360 / 420 mm

  Front I/O:

  USB-C (USB 3.2 Gen2x1 - 10 Gbps)
  2x USB-A (USB 3.2 Gen1x1 - 5 Gbps)
  3.5 mm Jack (Line-In/Out)
  Power Button

  Drive Bays:

  Behind the Mainboard Tray: 3× 2,5"
  HDD Cage: 2x 3,5" or 2,5" + 1x 2,5"

  Cabinet
  Cabinet Size	MID-TOWER
  Color	White
  Material	Tempered Glass
  Expansion Slots	7
  Motherboard Size	E-ATX
  Max CPU Cooler Height	171 mm
  Max PSU Length	318 mm
  Max Gpu Length	482 mm
  Max 3.5" HDD	2
  Max 2.5" SSD	3
  Dust Filters	Top,Right
  Pre Installed Fans	5
  Max Fan Support	8
  Radiator Support	420mm,360mm,280mm,240mm
  Front I/O Panel	USB-C,USB-A,Power Button
  Warranty	6 Years
  Note***	Features, Price and Specifications are subject to change without notice. Images use for Representation Purpose Only.

Artis Powersafe 600VA UPS in India. Reliable 600VA power backup with surge protection and AVR. Ideal for PCs, CCTV, routers & small office use. Genuine product with warranty.

🚀 Product Overview

The Artis Powersafe 600VA UPS is a compact and dependable power backup designed to safeguard your desktop computer, router, modem, CCTV DVR, and other sensitive electronics against power cuts, voltage fluctuations, and sudden outages — a common challenge in Indian households and small offices.

Manufactured for consistent performance, this UPS offers stable backup support and voltage regulation, making it ideal for students, home offices, professionals, and small businesses looking for an affordable yet reliable UPS solution.

🔥 Key Highlights 

• ⚡ 600VA / ~360W Power Capacity

• 🔋 Quick Battery Backup for PCs & Routers

• 🔌 Built-in Surge & Spike Protection

• 🔄 Automatic Voltage Regulation (AVR)

• 🛡️ Protection Against Overload, Overcharge & Short Circuits

• 🏠 Compact & Portable Design

• 🇮🇳 Ideal for Indian Power Conditions

📊 Technical Specifications

🔌 Output Sockets & Connectivity

• 2 × Standard Indian Power Sockets

• Perfect for:

  • Desktop Computers

  • Monitors

  • Wi-Fi Routers & Modems

  • CCTV DVR (Light Load)

🧊 Protection & Safety Features

• Automatic Voltage Regulation (AVR)

• Surge & Spike Protection

• Overload Protection

• Battery Deep Discharge Protection

• Short Circuit Protection

Ensures safe and reliable power support during frequent fluctuations — especially useful in Indian residential and commercial areas.

🎯 Best For

• Home Desktop PCs & Monitors

• Router & Modem Backup

• CCTV DVR & Low-Power Devices

• Small Offices & Shops

• Students & Home Offices

🖥️ Compatibility

✔ Compatible with PCs, Workstations & Monitors
✔ Works with Routers, Modems & Network Devices
✔ Simple Plug & Play Setup

📦 Box Contents

• Artis Powersafe 600VA UPS

• Power Cable

• User Manual

• Warranty Card

🛡️ Warranty & Authenticity

• 1–2 Years Manufacturer Warranty (India)

• 100% Genuine & Factory Tested Product

• Ideal for Retail, Wholesale & GST Billing in India

⭐ Why Buy Artis Powersafe 600VA UPS in India?

The Artis Powersafe 600VA strikes the perfect balance of price, reliability, and performance for users who need stable backup power without investing in large UPS systems. It’s a trusted choice for domestic and small business setups where power reliability matters.

Artis Powersave 1000VA UPS in India. Reliable power backup with AVR, surge protection & long battery life. Ideal for PC, CCTV, routers & office electronics.

🚀 Product Overview

The Artis Powersave 1000VA UPS is a high-capacity power backup solution designed to protect and power your desktop computer, monitor, router, CCTV system, and office electronics during power cuts, voltage fluctuations, and surges — frequent concerns in Indian residential and commercial settings.

This UPS combines efficient backup time, voltage stabilization, and multiple safety protections to ensure stable performance and data integrity in your home, workplace, or small business setup.

🔥 Key Highlights 

• ⚡ 1000VA / ~600–650W Power Capacity

• 🔌 Supports PCs, Routers, CCTV, Modems

• 🛡️ Surge & Spike Protection

• 🔄 Automatic Voltage Regulation (AVR)

• ⏱️ Fast Transfer Time

• 🔋 Long-lasting Sealed Lead Acid Battery

• 🏠 Compact & Durable Design

• 🇮🇳 Perfect for Indian Power Conditions

📊 Technical Specifications

🔌 Output Sockets & Connectivity

• Multiple Standard Indian Power Outlets

• Ideal for:

  • Desktop Computers

  • Monitors & Displays

  • Wi-Fi Routers & Modems

  • CCTV DVR / NVR (Moderate Load)

  • Printers & Small Office Devices

🧊 Safety & Protection Features

• Automatic Voltage Regulation (AVR)

• Surge & Spike Protection

• Overload Protection

• Deep Discharge Protection

• Short Circuit Protection

• Audible Alarm Indicators

Ensures safe and reliable power delivery even during unstable voltage situations common in many Indian regions.

🎯 Best For

• Desktop PCs & Workstations

• Office & Corporate Computers

• GST Billing / POS Systems

• CCTV DVR/NVR & Networking Devices

• Home & Small Business Electronics

• Students & Home Office Setups

🖥️ Compatibility

✔ Desktop PCs (Windows & Linux)
✔ Routers, Modems & Network Devices
✔ CCTV DVR / NVR Systems
✔ Printers & Small Office Devices
✔ Easy Plug & Play Installation

📦 Box Contents

• Artis Powersave 1000VA UPS

• Power Cable

• User Manual & Documentation

• Warranty Card

🛡️ Warranty & Authenticity

• 1–2 Years Manufacturer Warranty (India)

• 100% Genuine & Factory Tested

• Ideal for Retail, Wholesale & GST Billing

⭐ Why Buy Artis Powersave 1000VA UPS in India?

The Artis Powersave 1000VA strikes the perfect balance of backup power, reliability, and price, making it a top choice for Indian users who need dependable power support without overspending.

• High capacity for everyday electronics

• Stable AVR support

• Robust safety protections

• Trusted for home and office use

It’s a must-have UPS for uninterrupted productivity in India.

Experience the next generation of gaming with the ASRock Radeon RX 550 4GB GDDR5 Phantom Gaming Graphics Card. Powered by the groundbreaking AMD RDNA architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 550
• VRAM: 4GB GDDR5
• Series: Phantom Gaming
• Brand: ASRock
• Architecture: AMD RDNA
• Features: Ray Tracing, FidelityFX Super Resolution (FSR), AMD FreeSync
  

  Its single-fan design ensures maximum compatibility, making it an ideal choice for small form factor (SFF) builds or upgrading older systems with limited space. With 4GB of GDDR5 memory, this card provides enough overhead for multi-monitor setups and everyday creative tasks.

  ---

  Key Features

  • Phantom Gaming Design: A sleek, single-fan cooling solution optimized for airflow and thermal efficiency in tight spaces.

  • 4GB GDDR5 Memory: Provides plenty of VRAM for high-definition video streaming, light photo editing, and entry-level gaming.

  • Double Ball Bearings Fan: Engineered for longevity, the fan motor features double ball bearings to reduce friction and noise while extending the card's lifespan.

  • Compact Single-Slot Design: Effortlessly fits into small cases and doesn't block adjacent PCIe slots, making it perfect for ITX builds.

  • 0dB Silent Cooling: The fan only spins under load, ensuring a dead-silent experience during web browsing, office work, and movie watching.

  • ASRock Tweak Utility: Allows users to easily adjust clock speeds and fan settings for a more personalized performance profile.

  ---

  Technical Specifications

  • GPU: AMD Radeon RX 550

  • Stream Processors: 512

  • Memory: 4GB GDDR5 (128-bit)

  • Engine Clock: Boost: Up to 1100 MHz

  • Memory Speed: 6000 Mbps

  • Outputs: 1 x DisplayPort 1.4, 1 x HDMI 2.0, 1 x Dual-link DVI-D

  • Power Connectors: None (Powered by PCIe slot)

  • Recommended PSU: 350W

  • Form Factor: Single-slot

  
  

Experience the next generation of gaming with the ASRock Radeon RX 7700 XT 12GB GDDR6 Challenger OC Graphics Card. Powered by the groundbreaking AMD RDNA architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 7700 XT
• VRAM: 12GB GDDR6
• Series: Challenger OC
• Brand: ASRock
• Architecture: AMD RDNA
• Features: Ray Tracing, FidelityFX Super Resolution (FSR), AMD FreeSync
  

  Key Features

  • AMD RDNA 3 Architecture: Leverages advanced ray tracing and AI accelerators for immersive visuals and superior frame rates.

  • 12GB GDDR6 VRAM: Ideal memory capacity for smooth 1440p gaming and intensive multitasking.

  • Dual Fan Cooling: Two high-efficiency fans provide powerful airflow to keep the GPU and memory cool during heavy loads.

  • Metal Backplate: Adds structural rigidity to prevent PCB bending and gives the card a clean, premium look.

  • 0dB Silent Cooling: Fans stop spinning during low-load tasks, ensuring a completely silent desktop experience.

  • Super Alloy Components: Built with premium power chokes and a high-density glass fabric PCB for enhanced stability and a longer lifespan.

  ---

  Technical Specifications

  • GPU: AMD Radeon RX 7700 XT

  • Stream Processors: 3456

  • Memory: 12GB GDDR6 (192-bit)

  • Engine Clock: Boost: Up to 2584 MHz / Game: 2226 MHz

  • Memory Speed: 18 Gbps

  • Outputs: 3 x DisplayPort 2.1, 1 x HDMI 2.1

  • Power Connectors: 2 x 8-pin

  • Recommended PSU: 700W

  • Form Factor: 2.4-slot

  
  

Experience the next generation of gaming with the ASRock Radeon RX 7700 XT 12GB GDDR6 Phantom Gaming OC Graphics Card. Powered by the groundbreaking AMD RDNA architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 7700 XT
• VRAM: 12GB GDDR6
• Series: Phantom Gaming OC
• Brand: ASRock
• Architecture: AMD RDNA
• Features: Ray Tracing, FidelityFX Super Resolution (FSR), AMD FreeSync
  

  Key Features

  • AMD RDNA 3 Architecture: Leverages next-gen ray tracing and AI accelerators for stunningly realistic lighting and superior upscaling performance.

  • 12GB GDDR6 VRAM: The ideal sweet spot for modern 1440p gaming and efficient video editing.

  • Phantom Gaming 3X Cooling System: Three Striped Ring Fans and Ultra-fit Heatpipes provide exceptional airflow and thermal dissipation.

  • Polychrome SYNC: Vibrant ARGB lighting on the side and central fan can be fully customized and synced with other compatible hardware.

  • Metal Backplate: A stylish and reinforced metal backplate ensures structural rigidity and aids in cooling the PCB components.

  • 0dB Silent Cooling: Fans stop spinning during low-load tasks for a silent desktop experience.

  • Super Alloy Components: Features high-quality Dr.MOS and premium power chokes for stable power delivery and long-term reliability.

  ---

  Technical Specifications

  • GPU: AMD Radeon RX 7700 XT

  • Stream Processors: 3456

  • Memory: 12GB GDDR6 (192-bit)

  • Engine Clock: Boost: Up to 2599 MHz / Game: 2276 MHz

  • Memory Speed: 18 Gbps

  • Outputs: 3 x DisplayPort 2.1, 1 x HDMI 2.1

  • Power Connectors: 2 x 8-pin

  • Recommended PSU: 750W

  • Dimensions: 328 x 140 x 53 mm (2.8-slot)

  
  

Experience the next generation of gaming with the ASRock Radeon RX 7800 XT 16GB GDDR6 Phantom Gaming OC Graphics Card. Powered by the groundbreaking AMD RDNA architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 7800 XT
• VRAM: 16GB GDDR6
• Series: Phantom Gaming OC
• Brand: ASRock
• Architecture: AMD RDNA
• Features: Ray Tracing, FidelityFX Super Resolution (FSR), AMD FreeSync
  

  Unleash the ultimate gaming performance with the ASRock Radeon RX 7800 XT Phantom Gaming OC. Designed for gamers who demand a bold look and uncompromising speed, this card features a striking black and red aesthetic with integrated Polychrome SYNC ARGB lighting. Powered by the high-performance AMD RDNA 3 architecture and equipped with 16GB of GDDR6 memory, it is built to dominate 1440p gaming at ultra settings while providing the overhead needed for 4K.

  The Phantom Gaming series is known for its elite cooling, featuring the Phantom Gaming 3X Cooling System. With its high-density heatsink and striped ring fans, this card maintains optimal temperatures even during prolonged, intense gaming sessions.

  ---

  Key Features

  • AMD RDNA 3 Architecture: Featuring next-gen Ray Tracing and AI accelerators for immersive visuals and high frame rates.

  • 16GB GDDR6 Memory: Massive VRAM for high-resolution textures, high-refresh gaming, and professional content creation.

  • Phantom Gaming 3X Cooling System: Three Striped Ring Fans work in tandem with the Ultra-fit Heatpipe and a large nickel-plated copper base to keep the GPU and memory cool.

  • Polychrome SYNC: Features a central ARGB fan and side ARGB panel that can be synchronized with other ASRock components. Includes a physical LED On/Off switch.

  • Metal Backplate: A stylish and rugged metal backplate provides structural support and helps dissipate heat from the rear of the PCB.

  • Dual BIOS: Choose between "Performance" for maximum frame rates or "Quiet" for a silent acoustic profile.

  • Dr. MOS Design: Optimized power delivery for stable, cool, and efficient performance under heavy loads.

  ---

  Technical Specifications

  • GPU: AMD Radeon RX 7800 XT

  • Stream Processors: 3840

  • Memory: 16GB GDDR6 (256-bit)

  • Engine Clock: Boost: Up to 2565 MHz / Game: 2254 MHz

  • Memory Speed: 19.5 Gbps

  • Outputs: 3 x DisplayPort 2.1, 1 x HDMI 2.1

  • Power Connectors: 2 x 8-pin

  • Recommended PSU: 750W

  • Dimensions: 328 x 140 x 53 mm (2.8-slot)

  
  

Experience the next generation of gaming with the ASRock Radeon RX 7800 XT 16GB GDDR6 Steel Legend OC Graphics Card. Powered by the groundbreaking AMD RDNA architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 7800 XT
• VRAM: 16GB GDDR6
• Series: Steel Legend OC
• Brand: ASRock
• Architecture: AMD RDNA
• Features: Ray Tracing, FidelityFX Super Resolution (FSR), AMD FreeSync
  
  
  

   

  Description: Dominate your favorite titles with the ASRock Radeon RX 7800 XT Steel Legend OC. This card is a visual and performance masterpiece, featuring a striking white-and-silver shroud that makes it the centerpiece of any high-end PC build. Powered by AMD RDNA 3 architecture and packed with 16GB of GDDR6 memory, it delivers the frame rates and fidelity you need for 1440p gaming at ultra settings.

  The Steel Legend is engineered with ASRock's Triple Fan thermal system, ensuring the card stays cool under fire. It also comes with an ARGB-illuminated backplate and fans, which can be fully customized via Polychrome SYNC to match your system’s lighting.

  ---

  Key Features

  • 16GB GDDR6 VRAM: High-capacity memory ensures smooth performance in modern games and professional editing software.

  • Steel Legend Design: A premium white-and-silver aesthetic with a matching metal backplate, perfect for "all-white" or clean-themed builds.

  • Polychrome SYNC ARGB: Integrated ARGB LEDs on the fans and backplate can be synced with your ASRock motherboard. Includes a physical LED On/Off switch.

  • Triple Fan Thermal System: Features Striped Ring Fans and Ultra-fit Heatpipes for maximum heat dissipation and optimized airflow.

  • 0dB Silent Cooling: For complete silence, the fans stop spinning during light workloads.

  • Dr. MOS & Premium Power Chokes: High-quality power delivery components ensure stable performance during heavy overclocking and gaming sessions.

  ---

  Technical Specifications

  • GPU: AMD Radeon RX 7800 XT

  • Stream Processors: 3840

  • Memory: 16GB GDDR6 (256-bit)

  • Engine Clock: Boost: Up to 2520 MHz / Game: 2213 MHz

  • Memory Speed: 19.5 Gbps

  • Outputs: 3 x DisplayPort 2.1, 1 x HDMI 2.1

  • Power Connectors: 2 x 8-pin

  • Recommended PSU: 750W

  • Dimensions: 304 x 131 x 56 mm (2.8-slot)

  
  
  

Experience the next generation of gaming with the ASRock Radeon RX 7900 GRE 16GB GDDR6 Challenger OC Graphics Card. Powered by the groundbreaking AMD RDNA architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 7900 GRE
• VRAM: 16GB GDDR6
• Series: Challenger OC
• Brand: ASRock
• Architecture: AMD RDNA
• Features: Ray Tracing, FidelityFX Super Resolution (FSR), AMD FreeSync
  
  
  

  Description: Experience high-caliber 1440p and 4K gaming with the ASRock Radeon RX 7900 GRE Challenger OC. Built on the high-performance AMD RDNA 3 architecture, the "Golden Rabbit Edition" (GRE) offers an incredible balance of power and value. With 16GB of GDDR6 memory, this card is designed to handle demanding textures and Ray Tracing with ease.

  The Challenger series is focused on delivering thermal stability through its dual-fan cooling system and a high-quality metal backplate. This OC Edition comes factory-overclocked out of the box, ensuring you get the most out of your hardware from the moment you plug it in.

  ---

  Key Features

  • AMD RDNA 3 Architecture: Powering next-generation performance with dedicated Ray Tracing and AI accelerators.

  • 16GB GDDR6 Memory: Ample VRAM for high-resolution gaming and smooth multitasking in creative applications.

  • Dual Fan Thermal Design: Two large, high-efficiency fans provide superior cooling while keeping noise levels to a minimum.

  • Metal Backplate: Provides structural rigidity to prevent PCB bending and gives the card a clean, industrial look.

  • 0dB Silent Cooling: Fans stop spinning during low-load tasks for a completely silent experience while browsing or working.

  • Super Alloy Components: Featuring premium power chokes and a high-density glass fabric PCB for enhanced durability and overclocking stability.

  ---

  Technical Specifications

  • GPU: AMD Radeon RX 7900 GRE

  • Stream Processors: 5120

  • Memory: 16GB GDDR6 (256-bit)

  • Engine Clock: Boost: Up to 2293 MHz / Game: 1927 MHz

  • Memory Speed: 18 Gbps

  • Outputs: 3 x DisplayPort 2.1, 1 x HDMI 2.1

  • Power Connectors: 2 x 8-pin

  • Recommended PSU: 750W

  • Form Factor: 2.5-slot

  
  

Experience the next generation of gaming with the ASRock Radeon RX 9060 XT 16GB GDDR6 Challenger Graphics Card. Powered by the groundbreaking AMD RDNA 4 architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 9060 XT
• VRAM: 16GB GDDR6
• Series: Challenger
• Brand: ASRock
• Architecture: AMD RDNA 4
• Features: AI-powered Upscaling, FSR 4, Ray Tracing, AV1 Encoding
  

  Technical Details

  Brand	‎ASRock
  Manufacturer	‎ASRock, ASRock Taiwan
  Series	‎RX9060XT CL 16GO
  Item Height	‎0.1 Centimeters
  Item Width	‎6.4 Centimeters
  Resolution	‎7680 x 4320
  Product Dimensions	‎36 x 6.4 x 0.1 cm; 1.15 kg
  Item model number	‎9060 XT Challenger 16GB
  Graphics Coprocessor	‎9060XT
  Graphics Chipset Brand	‎AMD
  Graphics Card Description	‎AMD Radeon RX 9060 XT GPU, 16GB GDDR6, 32 Compute Units, AMD RDNA 4 Architecture, 1 x 8-pin Power Connector
  Graphics RAM Type	‎GDDR6
  Graphics Card Ram Size	‎16
  Graphics Card Interface	‎PCI-Express x16
  Wattage	‎550 Watts
  Are Batteries Included	‎No
  Included Components	‎Main unit, 1x Quick Installation Guide
  Manufacturer	‎ASRock
  Item Weight	‎1 kg 160 g

  
  

Experience the next generation of gaming with the ASRock Radeon RX 9060 XT 16GB GDDR6 Steel Legend Graphics Card. Powered by the groundbreaking AMD RDNA 4 architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 9060 XT
• VRAM: 16GB GDDR6
• Series: Steel Legend
• Brand: ASRock
• Architecture: AMD RDNA 4
• Features: AI-powered Upscaling, FSR 4, Ray Tracing, AV1 Encoding
  
  
• Clock: GPU / Memory
  Boost Clock*: Up to 3320 MHz / 20 Gbps
  Game Clock**: 2780 MHz / 20 Gbps
• Key Specification
  AMD Radeon™ RX 9060 XT GPU
  16GB GDDR6 on 128-Bit Memory Bus
  AMD RDNA™ 4 Architecture
  32 Compute Units (3^rd Gen RT + 2^nd Gen AI Accelerators)
  Microsoft^® DirectX^® 12 Ultimate
  PCI^® Express 5.0 Support
  1 x 8-pin Power Connector
  2 x DisplayPort™ 2.1a, 1 x HDMI™ 2.1b
• Key Features
  Polychrome SYNC
  Triple Fan Design
  Striped Ring Fan
  Stylish Metal Backplate
  Ultra-fit Heatpipe
  Air Deflecting Fin
  0dB Silent Cooling
  Super Alloy Graphics Card

Experience the next generation of gaming with the ASRock Radeon RX 9060 XT 8GB GDDR6 Challenger Graphics Card. Powered by the groundbreaking AMD RDNA 4 architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 9060 XT
• VRAM: 8GB GDDR6
• Series: Challenger
• Brand: ASRock
• Architecture: AMD RDNA 4
• Features: AI-powered Upscaling, FSR 4, Ray Tracing, AV1 Encoding
  

  Shopify-Ready Product Description

  Opens in a new window www.asrock.com

  Title: ASRock Radeon RX 9060 XT Challenger 8GB GDDR6 OC Edition

  Description: The ASRock Radeon RX 9060 XT Challenger is built for gamers who prioritize performance and reliability in a no-nonsense package. Leveraging the high-efficiency AMD RDNA 4 architecture, the Challenger series delivers smooth, high-frame-rate gaming at 1080p and 1440p resolutions.

  Designed with a dual-fan thermal system, the Challenger provides a compact footprint that fits easily into almost any chassis while maintaining excellent thermal management. Its clean, industrial look makes it a versatile choice for any gaming rig, focusing on delivering the best "bang-for-your-buck" in the Radeon 9000 lineup.

  ---

  Key Features

  • Dual Fan Design: Equipped with two large fans that provide strong cooling performance to keep your gaming rig frosty.

  • Compact Efficiency: A streamlined dual-slot design that offers maximum compatibility for small form factor (SFF) and mid-tower builds.

  • Metal Backplate: Strengthens the card to prevent PCB bending and gives the card a premium, finished look.

  • 0dB Silent Cooling: Features intelligent fan control where the fans stop during low-load tasks to ensure a quiet workspace.

  • Super Alloy Graphics Card: Built with high-quality components like premium power chokes and high-density glass fabric PCB for enhanced stability and lifespan.

  • RDNA 4 Ready: Fully supports hardware-accelerated Ray Tracing, AI-driven upscaling (FSR 4), and low-latency gaming.

  ---

  Technical Specifications

  • GPU: AMD Radeon RX 9060 XT

  • Stream Processors: 2048

  • Memory: 8GB GDDR6 (128-bit)

  • Engine Clock: Boost: Up to 3250 MHz / Game: 2680 MHz

  • Memory Speed: 20 Gbps

  • Outputs: 3 x DisplayPort 2.1a, 1 x HDMI 2.1b

  • Power Connectors: 1 x 8-pin

  • Recommended PSU: 600W

  • Form Factor: 2-slot

  
  

Experience the next generation of gaming with the ASRock Radeon RX 9060 XT 8GB GDDR6 Steel Legend Graphics Card. Powered by the groundbreaking AMD RDNA 4 architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 9060 XT
• VRAM: 8GB GDDR6
• Series: Steel Legend
• Brand: ASRock
• Architecture: AMD RDNA 4
• Features: AI-powered Upscaling, FSR 4, Ray Tracing, AV1 Encoding
  

  Shopify-Ready Product Description

  Opens in a new window www.asrock.com

  Title: ASRock Radeon RX 9060 XT Steel Legend 8GB GDDR6 OC Edition

  Description: Elevate your PC build with the striking aesthetics and high-performance cooling of the ASRock Radeon RX 9060 XT Steel Legend. Designed for gamers who want a premium look without sacrificing power, this card features the iconic Steel Legend white-and-silver shroud, complete with vibrant Polychrome SYNC ARGB lighting.

  Powered by the AMD RDNA 4 architecture, the RX 9060 XT Steel Legend is optimized for high-refresh 1080p and competitive 1440p gaming. Its triple-fan thermal design ensures that even during the most intense gaming sessions, your temperatures stay low and your clock speeds stay high.

  ---

  Key Features

  • Triple Fan Cooling: Three Striped Ring Fans provide enhanced intake and optimal airflow to the heatsink.

  • Steel Legend Aesthetics: A clean, white-and-silver design with a metal backplate that adds both style and structural rigidity to your build.

  • Polychrome SYNC: Customize your setup with integrated ARGB LEDs that can be synced with other ASRock components. Includes a physical LED On/Off switch.

  • 0dB Silent Cooling: The fans stop spinning during light use, giving you a completely silent experience when you aren't gaming.

  • Ultra-fit Heatpipes: Heatpipes are consolidated to maximize contact between each other and the GPU baseplate for superior heat dissipation.

  • Dr. MOS Design: Features the latest Dr. MOS technology for improved thermal performance and superior power delivery.

  ---

  Technical Specifications

  • GPU: AMD Radeon RX 9060 XT

  • Stream Processors: 2048

  • Memory: 8GB GDDR6 (128-bit)

  • Engine Clock: Boost: Up to 3300 MHz / Game: 2750 MHz

  • Memory Speed: 20 Gbps

  • Outputs: 3 x DisplayPort 2.1a, 1 x HDMI 2.1b

  • Power Connectors: 1 x 8-pin

  • Recommended PSU: 600W

  • Dimensions: 304 x 131 x 55 mm (2.8-slot)

  
  

Experience the next generation of gaming with the ASRock Radeon RX 9070 16GB GDDR6 Challenger 3F Graphics Card. Powered by the groundbreaking AMD RDNA 4 architecture, this card is engineered for ultra-fast performance and stunning visuals. Optimized for high refresh rate gaming and streaming.

• Model: Radeon RX 9070
• VRAM: 16GB GDDR6
• Series: Challenger 3F
• Brand: ASRock
• Architecture: AMD RDNA 4
• Features: AI-powered Upscaling, FSR 4, Ray Tracing, AV1 Encoding
  

  🔧 Key Specifications

  • GPU: AMD Radeon RX 9070 (RDNA architecture with RT + AI accelerators)

  • Memory: 16GB GDDR6, 256-bit bus

  • Clocks:

    • Boost Clock: Up to 2520 MHz

    • Game Clock: Around 2070 MHz

  • Compute Units: 56

  • Interface: PCI Express 5.0

  • Power: 2 × 8-pin connectors, recommended PSU ~700W

  • Outputs: 3 × DisplayPort 2.1a, 1 × HDMI 2.1b

  • Cooling: Triple-fan design, striped axial fans, ultra-fit heatpipe, 0dB silent cooling

  • Extras: Stylish metal backplate, LED indicator with on/off switch

  
  

  ⚡ Performance Notes

  • Built for high-end gaming at 1440p and 4K with ray tracing and AI acceleration.

  • PCIe 5.0 ensures future-proof bandwidth.

  • Silent cooling mode keeps noise low during light workloads